TRANSMISSION EXCHANGE CO

 

 

 

 

 

 

 

 

 

 

           Ford 6f35 Adaptive Learning Drive Cycle



NOTE: The transmission must be re-flashed before beginning this procedure.


Bring the transmission to normal operating temperature.

 


With the engine running and the brake applied, select the gears in the following order, pausing in each gear for 4 seconds: N, R, N, D, R, D, N. Repeat this pattern 2 times. If any engagements feel soft or harsh, repeat this procedure.


Drive the vehicle and accelerate at a moderate throttle so that the upshifts occur at 2,000 rpm up to 80 km/h (50 mph) and brake moderately to a stop. Repeat this pattern 2 times.


Drive the vehicle and accelerate at a moderate throttle so the upshifts occur at 3,000 rpm up to 80 km/h (50 mph) and brake moderately to a stop. Repeat this pattern 2 times.


With the engine running and the brake applied, select the gears in the following order, pausing in each gear for 4 seconds: N, R, N, D, R, D, N. Repeat this pattern 2 times.


From a stop, accelerate to 25 mph, then release the throttle. Keep the throttle closed and select the "L" position and allow the vehicle to coast down to 10 mph. Repeat this pattern 2 times.

 

 

 

 

TRANSMISSION EXCHANGE CO is located at 1803 NE MLKing Blvd., Portland, OR 97212. Ph. 503-284-0768, 800-776-1191 Fax 503-280-1655 E-mail mail@txchange.com

THE TRANSMISSION SUPERSTORE